Continuous Separation of Inclusions from Aluminum Melt Flowing in a Circular Pipe using a High Frequency Magnetic Field

The continuous separation of inclusions from aluminum melt flowing in a circular pipe using a high frequency magneticfield was investigated both theoretically and experimentally The separation efficiency was calculated based on thetrajectory method and compared with experimental results. It is found that the separation efficiency is a functilnondimensional parameters t_i·d_p~2B_e~2/μ_fμ_eα~2 and α/δ.The effective way to improve the separation efficiency is to increasethe effective magnetic flux density and decrease the pipe radius. and the value of α/δ should be kept about 2 in orderto obtain the optimum separation efficiency.     

提高热采注汽系统热效率的研究

为了降低热采成本和提高经济效益 ,建立了热采注汽系统热效率的数学模型。根据实测数据计算了 9个注汽系统的热效率。提出了改进注汽系统热效率的行之有效的措施。根据排烟的氧含量的大小 ,可以确定注汽锅炉热效率改进程度 ;按管线允许热损失量和保温材料种类 ,设计保温层厚度 ,可大大提高输汽管线热效率。仅此两项 ,即可使大部分注汽系统热效率提高 7%以上 ,井底蒸汽干度提高 10 %以上。     

Experience with Applying Formal Methods to Protocol Specification and System Architecture

In the last three years or so we at Enterprise Platforms Group at Intel Corporation have been applying formal methods to various problems that arose during the process of defining platform architectures for Intel's processor families. In this paper we give an overview of some of the problems we have worked on, the results we have obtained, and the lessons we have learned. The last topic is addressed mainly from the perspective of platform architects.     

3D圆阀塔板性能研究

介绍了3D圆阀塔板的结构特点和实验研究情况。以空气和水为工质进行了冷模实验,研究了3D圆阀塔板的塔板压降、雾沫夹带量和泄漏量等流体力学性能。利用氧解吸法测定其塔板效率,并在相同条件下与F1浮阀塔板进行了对比实验。结果表明,在相同条件下,3D圆阀塔板比传统F1浮阀塔板的塔板效率提高5%~15%,塔板压降约低100 Pa,泄漏量和雾沫夹带量与F1浮阀塔板基本相当,是一种综合性能优良的新型浮阀塔板。     

水库发电运行的计算机仿真

介绍了用VB语言编写的一个简便、实用的适合洞坪水库发电运行的计算机仿真程序.     

Flood frequency and routing processes at a confluence of the middle Yellow River in China

Floods cause environmental hazards and influence on socio‐economic activities. In this study, we evaluated the historic flood frequency at a confluence in the middle Yellow River, China. A non‐parametric, multivariate, empirical, orthogonal function matrix model, which consists of time correlation coefficients of flood discharge at different gauge stations and flood events was used for the analysis of flood frequency. The model addresses the characteristics of confluent floods such as frequency and the probability in multiple tributary rivers. Flood frequency analysis is often coupled with studies of hydrological routing processes that reduce the flood capacity of the rivers. Flood routing to the confluence were simulated using kinematic wave theory. Results of this flood frequency analysis showed that flooding frequency has intensified in the past 500 years, especially during the 19th century. Flooding in streams above the confluence was more frequent than in streams below the confluence. Over the last 2000 years, concurrent flooding in multiple tributary rivers accounted for 67.5% of the total flooding in the middle Yellow River. Simulation of flood routing processes shows that the decreased flooding capacity and elevated river bed of the shrunken main channel leads to an increased flood wave propagation time (24–52.3 h) in the study area after 1995. The model indicates that human activities, such as constructions of the Sanmenxia Dam, have changed flood routing boundary conditions and have contributed to the increased flood frequency at the confluence. Copyright © 2007 John Wiley & Sons, Ltd.     

A survey of models and algorithms for winter road maintenance. Part IV: Vehicle routing and fleet sizing for plowing and snow disposal

This is the last part of a four-part survey of optimization models and solution algorithms for winter road maintenance planning. The two first parts of the survey address system design problems for winter road maintenance. The third part concentrates mainly on vehicle routing problems for spreading operations. The aim of this paper is to provide a comprehensive survey of optimization models and solution methodologies for the routing of vehicles for plowing and snow disposal operations. We also review models for the fleet sizing and fleet replacement problems.     

矿山空压机设备的经济运行

空压机设备是煤矿耗电量较大的设备之一。如何提高空压机设备的运行效率,对节约电能和降低生产成本有着非常重要的意义。文章论述了提高空压机运行效率的措施及方法,提出了合理化建议。     

Water and Radiation Effect on Sweet Sorghum Productivity

Suitability of sweet sorghum in Greece, where irrigation supply during crop development is limited as rainfall is scarce and evapotranspiration loss is high, is examined in relation with radiation availability. A two-year field experiment was conducted, in central Greece, imposing four soil water regimes via different irrigation treatments: (1) Highly irrigated, (2) Highly irrigated till anthesis when irrigation stopped, (3) Medium irrigated, and (4) Low irrigated. It was found that above-ground dry biomass production from non-water-stressed sweet sorghum plants suggests a high productivity potential among C₄ crops. Under water shortage, radiation use efficiency may be significantly lower. Radiation use efficiency seems to be linearly related to water consumption. Stressed plants (probably except severely stressed) seem to use available water more efficiently than unstressed plants. The slope of the line relating dry matter produced and water evapotranspired increases the sooner the stress is sensed. Yield reduction resulting from post-anthesis irrigation stopage is very little. High water use efficiency values tend to be related with low radiation use efficiency values.     

稠油井注汽系统的热效率分析

建立了热采注汽系统热效率的计算模型。根据XX油田数据计算了2个注汽系统的热效率。提出了提高注汽系统热效率的三项措施：（1）降低锅炉的过剩空气系数；（2）按最大允许热损失设计地面输汽管线的保温层厚度；（3）使用视导热系数小的隔热油管，按箍增加隔热结构，防止热封隔器的泄漏等。